基于PLC的自动送料装车控制系统设计本科毕业设计.docVIP

摘要 基于PLC的自动送料装车控制系统设计 工程学院毕业设计（论文） PAGE IV PAGE I 基于PLC的自动送料装车控制系统设计 摘 要 传统的运料小车大都是继电器控制，而继电器控制有着接线繁多，故障率高的缺点，且维护维修不易等缺点。作为目前国内控制市场上的主流控制器，PLC在市场、技术、行业影响等方面有重要作用，利用PLC控制来代替继电器控制已是大势所趋。 送料装车控制系统的工作环境通常比较恶劣，所以对送料装车控制系统工作的安全性、可靠性、维护简便性要求较高。采用可靠性较高的S7- 200 PLC 软件来控制该系统，实现送料装车系统的自动控制过程，可满足系统可靠性、稳定性和实时性的要求。 本设计是为了实现送料小车的手动和自动化的转化，改变以往小车的单纯手动送料，减少了劳动力，提高了生产效率，实现了自动化生产！而且本送料小车的设计是由于工作环境恶劣，不允许人进入工作环境的情况下孕育而成的。 关键词：PLC，送料小车，控制，程序设计，组态王 Design of Automatic Send Materials and Load Control System Based on PLC ABSTRACT Traditional transport materials are mostly car relay control, relay control wiring has numerous shortcomings of the high failure rate, and the repair is not easy to maintain the shortcoming. As a control of the current domestic market, the mainstream controller, plc in the market, technology, industry has an important role in the impact of the use of PLC control to replace the relay control has become a trend. The working environment of the feeding and loading control system was usually more severe. Therefore, the requirements for the security, reliability and easy main tenance are more demanding. With a more reliable S7-200 PLC softw are to control the system so as to achieve the process of automatically controlled feeding and loading can meet the requirements of reliability, stability and real-time for the system. In order to achieve the design of the car feed the transformation of manual and automated，simple to change the past，car manual feed，a reduction of the workforce， increased productivity，automated production! Feeding and the car is designed to be as a result of bad working conditions are not allowed to enter the working environment of the circumstances formed. KEY WORDS:PLC , Feeding car, Control, Program design, monitoring 前言 目　录 TOC \o 1-3 \h \z \u 前　言 h 1 第1章 绪论 h 3 1.1 方案论证 h 3 1.2 可编程控制器概况 h 4 1.2.1 PLC的定义 h 4 1.2.2 PLC的发展 h 4 1.2.3 PLC的基本组成及各部分作用 h 5 1.2.4 送料装车控制系统PLC的选择 h 8 1.2.5 PLC的应用领域 h 9 1.3 组态王概况 h 10