反射面天线仿真.ppt

Array Overview Analysis Approaches Unit Cell Analysis with Master / Slave Boundaries Unit Cell Simplification Master/Slave Boundaries Unit Cell Creation Verifying the Unit Cell Geometry Floquet Ports Overview Floquet Mode Visualization Floquet Ports: Determining the Modes to Include Modes Calculator Floquet Port Setup Floquet Port Setup What if the Lattice is Triangular Floquet Port Setup Floquet Port Setup Floquet Port Setup Results – Matrix Data Results: Return Loss/Insertion Loss Finite Array Analysis Challenges for Large Finite Array Modeling Domain Decomposition Overview Solution: Finite Array DomainDecomposition Finite Array DDM Tool Advantages How It Works!!! How It Works!!! How It Works!!! How It Works!!! Probe Fed Patch Array with Feed Network Finite Phased Array Setup Using DDM Unit cell is analyzed to create mesh Unit cell mesh is then replicated to form remaining elements in the array Mutual Coupling Data Active Return Loss with Phase Taper Embedded Element Patterns Array Pattern in the E-Plane Array has no phase shift taper so thebeam is pointed toward boresite Sidelobe Levels are -10.86dB and-13.23 dB in the E H Planes. Array Pattern Scanned to 45o in the E-Plane Explicitly Solved Patch Array vs. DDM Comparison Outline Antenna simulation Different solvers for different antennas Antenna array simulation Small arrays Feed networks Large arrays Active element pattern Online demo A small selection... Antenna Simulation Different antenna types require different solver technologies. Transient Solver Frequency Solver Integral Equation Solver Antenna Arrays Small Arrays Distributed Computing (DC) Multiple Element Excitation Array Feeding Networks Large Arrays Infinite Array Infinite Array FarfieldArray Infinite Array Active Element Pattern Finite Array Analysis CST Array Wizard Summary 设计步骤 1. Draw the unit cell, containing all appropriate boundaries and source definitions. 2. Create the antenna array, including name, dimensions, master and slave bounda