基于PROE的手机充电器三维实体仿真设计毕业论文.docVIP

基于PROE的手机充电器三维实体仿真设计 PAGE \* MERGEFORMAT 62 成都理工大学工程技术学院毕业论文 基于Pro/E的手机充电器三维实体仿真设计 作者姓名： 专业名称：机械设计与制造 指导教师： 摘要 本设计详细介绍一款手机电池充电器产品的结构设计。它的零件数目不多,但各零件之间的配合关系较为紧密,拟采用自顶而下(TOP-DOWN)方法来进行设计.首先设计一个主控件(Master Part)，接着建立一个装配有主控件的组件文件,然后利用主控件的基本几何信息继续创建具体的主要零件。通过对手机充电器的设计可以发现在产品开发过程中，绝大部分类似产品是近似的对称结构；或者在同一产品中有许多相同或相似的特征；或者由于产品系列化的原因，以前的产品中曾有过相同或相似的结构。对于这些特征，没有必要再去每一步设计它的尺寸结构,可以在Pro/ENGINEER?中快速复制这些特征，从而大大加快及优化产品的设计。 关键词：Pro/ENGINEER 组件创建 曲面设计 手机充电器外壳 Abstract The detailed design of a cell phone battery charger on the structural design of products. Its the small number of parts, but the relationship between the parts more closely, to be a top-down (TOP-DOWN) approach to design. The first to design a master control (Master Part), then there are the establishment of an assembly The main components of document control, and then use the main controls the basic geometric information to create a specific major components. Based on the design of mobile phone chargers can be found in the product development process, the vast majority of similar products is similar to the symmetrical structure, or in the same product in many of the same or similar features, or because of the reasons for the serialization of products before the products There have been in the same or similar structure. For these characteristics, no need to go step by step design of the structure of its size, can Pro / ENGINEER in the rapid reproduction of these characteristics, thus greatly speed up and optimize the product design. Key words: Pro / ENGINEER, components designed to create surface shell, phone chargers. 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc17497 摘要 l _Toc19550 Abstract l _Toc11471 目录 l _Toc4013 前 言 l _Toc20848 1材料的选取 l _Toc10304 1 ABS树脂的性质 l _Toc32247 2 绪 论 l _Toc8978 2.1手机充电器简介 l _Toc25328 2.2 电话的市场调研 l _Toc28660 2.3 手机充电器的市场走向 l _Toc5248 3 概述 l _Toc28615 3.1 Pro/E软件的建模功能 l _Toc16419 3.2建模功能 l _Toc12717 3.3建模准则 l _Toc22947 4 Pro/E在创建手机外壳零件模型中应用 l _Toc16051 4.1零件造型分析 l _Toc16