毕业论文：常压无夹套不锈钢搅拌釜设计.docVIP

PAGE l 分类号 密级 U D C 中国地质大学江城学院 毕业论文（设计） 常压无夹套不锈钢搅拌釜设计 姓 名： 专 业：机械设计制造及自动化 班 级： 学 号： 指导教师： 教授 论文外文题目: Atmospheric pressure without clip set of stainless steel stirred tank design 论文主题词： 搅拌釜的总体结构设计与分析 外文主题词： Stirred tank general structure design 论文答辩日期：2012. . 答辩委员会主席： 评阅教师： l 摘 要 本设计主要通过YSRG160型反应釜做为基础，设计出能满足植物油的碱炼的搅拌装置。碱炼的原理是碱溶液与毛油中的游离脂肪酸发生中和反应。反应式如下：RCOOH＋NaOH→ROONa＋H2O 。 设计搅拌装置的目的则是在碱炼时让碱滴分散得细，碱液的总表面积变大，从而增加了碱液与游离脂肪酸的接触机会，加快了反应速度，缩短了碱炼过程，有利于精炼率的提高，并且增进碱液与游离脂肪酸的相对运动，提高反应的速率，并使反应生成的皂膜尽快地脱离碱滴。所以碱炼的反应过程对搅拌速率与程度有相当高的要求，此次设计就是通过这些要求对搅拌装置进行设计与选型。 关键词：搅拌设备 化工机械 化学反应器 生物反应器 可靠性 ABSTRACT This design mainly through the YSRG160 type the reaction kettle as the foundation, the design of the vegetable oil can meet the alkali refining mixing device. The principle of alkali refining alkali solution and hair oil is the free fatty acid neutralization reaction happened. Reactive as follows: RCOOH + NaOH-ROONa + H2O besides the neutralization reaction, and some physical chemistry. The purpose of the design device is in alkali refining alkali drops to let scattered fine, the total surface area is big, thus increasing the lye contact with free fatty acid, speeding up the reaction speed, shorten the alkali refining process, be helpful for the improvement of refining yield and improve the lye and free fatty acid relative motion, improve the reaction rate, and the reaction of the generation of soap film from alkali drops as soon as possible. So alkali refining reaction process on the stirring speed and extent has quite high demand, the design is through these requirements for mixing device in the design and selection. Key word: Mixing equipment Chemical machinery Chemical reactors Biological reactor Reliability