基于WinCC自动洗车监控系统设计_毕业设计.docVIP

吉林化工学院毕业设计说明书 基于WinCC自动洗车监控系统设计 Design of Automatic Vehicle Cleaning Simulation System Based on WinCC 学生学号： xxxxxxxx 学生姓名： xxxxxxxx 专业班级： xxxxxxxx 指导教师： xxxxxxxx 职 称： xxxxxxxx 起止日期： 2013.03.04～2013.06.23 吉 林 化 工 学 院 Jilin Institute of Chemical Technology 基于WinCC自动洗车监控系统设计 吉林化工学院毕业设计说明书 - PAGE IV - - PAGE I - 摘 要 随着中国汽车市场的快速发展，汽车保有量的不断增加，汽车后市场也在快速的发展之中。汽车工业发展迅速，随着汽车保有量的增加，汽车维修保养行业也迅速发展，许多企业都在角逐国内汽车维修保养市场。目前，国内洗车机设备性能不够稳定，故障率高，外观设计存在抄袭，粗糙等弊端。 本文以西门子WinCC为背景，对自动洗车的工艺特点、工艺参数、控制难点进行综合分析，确定了自动洗车的控制方案，并对自动洗车控制系统进行了系统模拟联调和运行，完成了自动洗车控制系统中流程图绘制、数据库建立、动态链接、画面切换、故障和报警系统设计等等，实现了洗车过程中手自动切换，完成预洗、泡沫冲洗、清水冲洗和风干等环节。 关键词：洗车机；控制方案；自动控制 基于WinCC自动洗车监控系统设计 - PAGE III - Abstract With the rapid development of China’s auto market ,car ownership is increasing gradually, which leads to fast developing of the automobile after-sales market. Under the circumstances of rapid development of automobile industry ,as well as the increase of the auto possession, car maintenance industry has won fast progress as well, which leads to fierce competition among enterprises to meet the competitive challenges of car maintenance market in domestic. At present, there are many shortcomings with regard to domestic car washer equipment performance, such as not stable enough, high failure rate, plagiarized exterior design and rough performance, etc.. Against the background of Siemens WinCC, the paper give comprehensive analysis about the technological characteristics, technical parameters and control difficulties of automatic car washing process. Then, we can determine the automatic control scheme and conduct system simulation, joint debugging and operation about the automatic car-washing control system. We have Complete the task of flow chart drawing, database establishment, dynamic link, screen switching and the design of fault and alarm system of the automatic car-washing control system. Furthermore, we have achieved the goal of au