A study of passive ventilation integrated with heat recovery 被动通风与热回收相结合的研究.pdfVIP

Energy and Buildings 82 (2014) 799–811 Contents lists available at ScienceDirect Energy and Buildings j o u r na l h o me p a ge : w w w. elsev /locate/enbuild A study of passive ventilation integrated with heat recovery Dominic O’Connor ∗ , John Kaiser Calautit, Ben Richard Hughes School of Civil Engineering, University of Leeds, Leeds LS2 9JT, United Kingdom a r t i c l e i n f o a b s t r a c t Article history: To meet the demand for energy demand reduction in heating, ventilation and air-conditioning systems, a Received 9 December 2013 novel design incorporating a heat recovery device into a wind tower was proposed. The integrated system Received in revised form 25 February 2014 uses a rotary thermal wheel for heat recovery at the base of the wind tower. A 1:10 scale prototype of Accepted 21 May 2014 the system was created and tested experimentally in a closed-loop subsonic wind tunnel to validate Available online 5 June 2014 the Computational Fluid Dynamics (CFD) investigation. Wind towers have been shown to be capable of providing adequate ventilation in line with British Standards and the Chartered Institution of Building Keywords: Services Engineers (CIBSE) guidelines. Despite the blockage of the rotary thermal wheel, ventilation rates Air supply rate, CFD