六氟化硫绝缘开关气体中微水含量在线监测原理与方法的研究-高电压与绝缘技术专业论文.docx

英文摘要Abstract 英文摘要 Abstract When moisture content in SF6 Gas—insulator switchgear reaches to a certain extent，It could be compounded with product of SF6’s decompose under arc action and then produces poison which results in chemic corrupt．At the same time，it also arouses the drop of insulated performance and bring 0n flashover of insulated surface The electrical and mechanical characteristic is influenced by moisture content，as well the badness would happen． This paper studies the source，change rule and quantitatively harm of moisture content in SF6 gas Based the humidity theory，the paper adopts the relative humidity the characte value and puts forward using 30％RH and below OoC dew-point the on—line monitoring critical value It gives the method of volume ratio convert at the different tempe rature．With the standard value，we conclude the result of moisture content． The paper studies the present situation and characteristic of sensors and brings forward using macromolecule polyimide—based capacitive humidity sensor in on-line monitoring system which has physical adsorption and can continuously measure between 0 to 100”C．By adopting the method of saturated aqueous salt solutions，the paper designs the equipment to produce the humidity source and scale PI sensors．Based on the design and long period measurement of demarcated equipment，we get the lots of and data that shows the linear relation between capacity and moisture and good linearity and resolving power According to disposal and analysis of sample data，it brings forward the principle and method of digital measurement—···---frequency measurement and designs the hardware system The circuit suit for long—distance transmission and monitoring and has high pl’ecision and anti-jamming characteristic．It measures the frequency by PCI card which is base the method of multi—period synchronization． The paper studies the mechanism of the monitoring system and gives it’s structure．Considering the practice，the software is compile