框架结构楼房爆破拆除计算机分析-采矿工程专业论文.docxVIP

AbstractIn Abstract In this paper,the state of the art of the engineering controlled expiosion and the Finite Element Method(FEM)are reviewed． In order to analyze and simulate the demolishment of frame—structured buildings due to controlled blasting，the method of killing or activating elements，a high level technique in FEM，and the special element--SOL【D65 are introduced to the blasting field first in china by the author．Before being destroyed absolutely,the components of the structure are discussed with some properties such as stress，strain，cracks created and locations of the plastic gemels． Based on the achievements all over the world，all kinds of numerical simulation methods are compared and a conclusion is drew which indicates that FEM is more consummate than DEM and DDA．Provided that the model and parameters are rationally selected，we can simulate the blasting process precisely as possible． For the more perfect function during structural analysis than other soft， ANSYS is used to analyze the transient of the structme throu吐its structural module in this paper．Solid65 is all especial element for reinforeed concrete in ANSYS that can be used to build an integral model to make more convehience to simulation． The primary conclusions are drawn in this paper on these points： (1)After the blasting data of delayed time and height are gained based on the theory of gradually disintegration．the elements need t0 HII are executed similar with destroying the part of the building．Then the pre-condition CG solver is pitched on to execute the nonlinear analysis． 化)The process of nonlinear analysis is done repeatedly until the results are converged．After that，the results are translated to corresponding properties of those components in the post·processing module and compared with the actual engineering after the error is estimated． (3)In this study,after building conect model and executing rational calculation，the results，which included stress-strain curve，bent chart， displacement