钻杆常用英文以及翻译.docVIP

实用标准文案 文档大全 油钻具的外单专用语翻译小结 Stabilizer；稳定器string integral blade stabilizer钻柱型整体螺旋稳定器string integral blade stabilizer 钻柱型可换套稳定器near bit sleeve stabilizer 井底型可换套稳定器? ? mandrel 芯棒?? width宽度hole size 井眼尺寸 angle角度??size of collar O.D.-I.D 钻铤的尺寸内外径CONN UP DOWN 接头上下端Pin and box should be protected by phosphate surface coating公母扣表层应磷化Thread roots should be cold rolled equipped with cast steel thread protector 螺根应钢化Box with lifting balt母扣端加工提升短节welded 焊接的 ?tube I.D OD 管体内外径?? taper upset抬肩倒角 ??centre upset 中部加厚 tool joint 接头 Hardbanding 耐磨带wear pads of 1on both pin and box end (Amco 300XT)applied prod 在公母螺纹两端各敷焊3圈安科300XT的耐磨带Bore back on box 在母螺纹端加工插孔Stress relief groove on pin 在公螺纹端加工应力分散槽Internal plastic coating :TK34L 内涂 Thread protector: pressed steel 冲压钢制护丝帽O.E.M(original.equipment.manufacturer)初始设备制造厂家Certificate of origin 原产地证明Warranty certificate 保单证明 All subs must be completed with steel thread protector.所有接头必须有护丝帽Commissioning conditions_调试条件Documentations 必备资料References 备注Pup joint 短钻杆REG –regular 扣型Elevator recess 吊卡槽Bevel 倒角Sealing face 密封面Deformation 变形Down-hole 井下管柱Tolerance 耐受力Flank 侧面? ?full faceCorresponding 一致的，对等的Derived 由…..而来Arbitrarily 任意的Reference Dimension参考尺度.HWDP 加重钻杆Ex-work price 出厂含税价RMB/Joint 元/根 Drill Pipe 钻杆 Drill Collar 钻铤 Heavy Weight Drill Pipe 加重钻杆 Elevator 吊卡 Tong 大钳 Make-up Tong 上扣大钳 Break-out Tong 卸扣大钳 Mud Box 泥浆防喷盒 Casing Stabbing Board 套管扶正器 Slips 卡瓦 Spider 卡盘 Mouse Hole 小鼠洞 (接单根用) Kelly Spinner 方钻杆旋转器 Kelly Cock 方钻杆阀 Chain Tong 链钳 Casing 套管 Tubing 油管 Drill String 钻柱 Jar (drilling jar) 震击器 Right Hand Thread 正扣 Left Hand Thread 反扣 Stabilizer 扶正器 Rabit 通管器 Liner 尾管 Conductor 导管 Thread Protector 护丝 Stand (钻杆) 立柱 Single (钻杆) 单根 Joint (钻具) 根 Bend 弯头 Sub 短节 Pup Joint 短钻杆, 短节 Connector 接头 Bit 钻头 Bit Breaker 钻头盒 Box 母扣 Pin 公扣 Hole Opener 开眼钻头 Reamer 扩眼钻头 Overshot 打捞筒 Junk Basket 打捞篮 Junk Mill 平头磨鞋 Spear 打捞矛 Fishing Tap 打捞公锥 Cross Over Sub (XO Sub) 转换接头 Bottom Hole Assembly (BHA) 下部钻具组合材料和工具 Steel 钢 Iron 铁