配置VOIP与PSTN相互直拔流程asterisk(freePBX)+linksys spa.docVIP

配置VOIP与PSTN相互直拔流程-asterisk(freePBX)+linksys spa3000 原文在此：/2006/10/15/configuring-sipura-spa-3000-as-trunk-within-asterisk-voip-pbx-server/ 我来补充实际截图吧。  Configuring Trunk within Asterisk PBX using AMP Login to AMP (Asterisk Management Portal). Navigate to Setup, Trunks, and choose “Add SIP Trunk”. General Settings  1.Outbound Caller ID: (leave blank - cannot be used by POTS line) 2.Maximum Channels: 1 (required - see note below) NOTE: Each SPA-3000 supports a single channel. You need to setup multiple trunks for multiple SPA-3000 devices. Outgoing Dial Rules Dial Rules: 1NXXXXXXXXX