矿焦槽除尘系统设计优化与研究-建筑与土木工程专业论文.docxVIP

西安建筑科技大学工程硕士学位论文 西安建筑科技大学工程硕士学位论文 Design optimization and study on dedusting system of ore coke tank Specialty: Architecture and Civil Engineering Name: Fan Weihua Adviser: Prof.Wang Yi Abstract In recent years, with the continuous development of the steel industry, pollution control, environmental protection has become increasingly important. The main raw material is blast furnace iron ore, coke and ore in the iron works and other raw materials trough parts of the system is often the most important ironworks dust pollution. In this paper, Wuhan Iron Works New 3200m3 blast furnace project-based, focus on the mineral dust tank system design methods and design of the relevant theory. In this paper, the feed system of Wuhan Iron Works with a brief introduction process, and focus on the process of mining and coke channel analysis and discussion of major equipment. This paper analyzes the mine and coke dust points of each trough dust production mechanism, and on this basis to discuss the point of dust production method of selecting the amount of dust the wind, and dust on the different methods were analyzed and compared, optimal selection. And proposes a new sealing removable tank ventilation plus dust on the side ventilation slots program. This article also focus on the mining facilities of the main tank removal equipment design and selection methods for the analysis and discussion, and not the type of dust removal equipment for the economic and technical comparative analysis, optimization of selection. Finally,this paper also introduced the dust removal system startup and daily operation and maintenance management method and the attention points, dust removal system for the commissioning and operation management personnel to provide the reference. Keywords：Ore focal Tank; Dedusting system; Optimization design 西安建筑科技大学工程硕士学位论文 西安建筑科技大学工程硕士学位论文 A 面积 主要符号表 [ m 2 ] Q 风量 [ m3 / h ] u v 流速 比容 [ m / s ] [ m3 / kg ] Vf 过滤风速 [m/min] d 直径 [m] N 轴功率 [kW] n 转速 [r/min] ρ 密度 [ kg