平整轧制过程中带钢表面形貌的生成模型-NSFC.pdf

49 14 Vol.49 No.14 2 0 1 3 7 JOURNAL OF MECHANICAL ENGINEERING Jul. 2 0 1 3 DOI 10.3901/JME.2013.14.038 * ( 100083) - TG335 Model for the Generation of Surface Topography in Steel Strip Temper Rolling ZHANG Xiaofeng LI Rui ZHANG Boyang ZHANG Qingdong (School of Mechanical Engineering, University of Science and Technology, Beijing 100083) Abstract The surface topography plays an important role in surface quality of cold-rolled steel strip. How surface topography changed in temper rolling is investigated. Based on Ritz method, a new numerical solution of steel strip plastic deformation during temper rolling is developed. Combining it with elastic deformation of rolls, the integration model of rolls and strip is built. Then the elastic-plastic contact between work roll and steel strip is simplified to asperity contact between one rough surface and one ideal smooth surface. The micro models of the generation of steel strip surface topography with pressing-in, furrowing and squeezing are built. The models considered the uplift effect of edges and neighbor role of asperities. Combining two kinds of models mentioned above, a model for the generation of surface topograph