带风管折边机的设计与实现概要.docVIP

Open Journal of Nature Science 自然科学, 2015, 3(3, 89-94 Published Online August 2015 in Hans. /journal/ojns /10.12677/ojns.2015.33012 The Design and Implementation of a Folding Machine with Wind Pipes Jingman Xia1, Wei Li1, Jie Tang1,2, Rong Liu1,2 1Chongqing Huafu Industrial Co., Ltd, Chongqing 2Chongqing Changpeng Industrial Group Co., Ltd., Chongqing Email: 515742230@ Received: Aug. 1st, 2015; accepted: Aug. 14th, 2015; published: Aug. 21st, 2015 Copyright ? 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY. /licenses/by/4.0/ Abstract Flap is a fundamental technology for processing. The folding machine plays an important role for the consistency, appearance and hemming productivity of the products. This equipment is a dedi-cated edging hemming device of the ceiling skylights, which is single-station and works indepen-dently. Its functions are burring and adhesive, pressing and stereotype for skylights by the lifting mechanism, flanging mechanism, lifting mechanism, etc. Thus it would complete the edging action of the workpiece. In order to ensure that the workpiece is not contaminated, SMC oil-cylinder is selected for all edging parts. And the guiding of all lifting parts is made of linear motion bearings. The electrical systems adopt Omron PLC. The buttons of control adopt touch screen. The structure of the device is compact. The installation and retooling are convenient. And the parameter ad-justment is convenient. The device is easy to operate, and has high safety. Keywords Wind Pipes, Folding Machine, Hemming Device, Dormers 带风管折边机的设计与实现 夏静满1,厉伟1,汤捷1,2,刘荣1,2 1重庆华福车船电子设备制造有限公司,重庆 2重庆长鹏实业(集团有限公司,重庆 Email: 515742230@ 夏静满等 收稿日期:2015年8月1日;录用日期:2015年8月14日;发布日期:2015年8月21日 摘要 “折边”是加工的一项基本工艺,折边机对产品的一致性、美观性及折边生产效率起着重要作用。本文的设备是顶棚天窗专用包边设备,单工位独立工作。其功能是通过升降机构、翻边机构、顶升机构等对天窗进行翻边粘合、保压定型,从而完成工件的包边动作。本设备中,为确保工件不被污染,各包边部位选用SMC无油气缸,各升降部位导向均采用直线运动轴承。电气系统中采用欧姆龙PLC,控制按钮采用触摸屏形式。本设备整机结构紧凑,安装、换模方便,触摸