三通零件成形过程的数值模拟研究.pdfVIP

上半月出版 Casting Forging Welding 金属铸锻焊技术 三通零件成形过程的数值模拟研究 郭亚明1 2 2 张宝红 张治民 渊1.中北大学材料科学与工程学院袁山西太原030051 曰2. 山西省集成精密成形工程中心袁山西太原030051 冤 摘 要院为了解决三通零件加工时材料利用率低尧模具寿命短尧 能差等问题袁针对三通零件的几何形状特点袁通 过有限元分析软件MSC-Superform 模拟三通件不同多向加载方式的成形过程曰通过对多向同步尧分步尧顺序加载三种不 同成形方式下的金属流动规律的比较袁确定了多向同步的加载方式为最佳方案遥 关键词院三通零件曰多向同步曰数值模拟 中图分类号院TG376.2 文献标识码院A 文章编号院 Numerical Simulation of Forming Process for Three Links Components 1 2 2 GUO Yaming , ZHANG Baohong , ZHANG Zhimin (1.Institue of Material Sc ience and Engineering, North Univers ity of China, Taiyuan 030051,China;2. Engineering Technology R esearch Center f or Integrated Precis ion Forming of Shanxi Prov ince, Taiyuan 030051, China) Abstract 院 In order to solve the questions of low material utilization ratio,short die life and poor performance, according to the characteristic of three links components, the finite element software MSC-Superform was used to numerically simulate the forming process of the workpiece under different forming methods. Comparing the metal flow law under three forming methods: multi-directional synchronous loading method, multi-directional step loading method and multi-directional sequential loading method,the multi-directional synchronous loading method was determined the best method. Key words 院three links components; multi-directional synchronous loading method; numerical simulation 航空尧 石油化工和动力工业的发展对复杂锻件