红外窗口热变形对零位检测成像质量影响分析-红外技术.pdfVIP

第37 卷 第 9 期 红 外 技 术 Vol.37 No.9 2015 年 9 月 Infrared Technology Sep. 2015 〈测量技术〉 红外窗口热变形对零位检测成像质量影响分析 王劲松，侯升日，柳 鸣，曹维国，王立秋 （长春理工大学，吉林长春 130022 ） 摘要：针对一个双层红外窗口进行了完整地光机热集成分析，包括结构设计、结构有限元分析以及热 光学特性分析。利用MSC Nastran 和Hypermesh 对光机结构系统在轴向温度梯度场下进行热弹性分析。 分析可知双层红外窗口的最大位移形变量为1.01×10－1 mm ，将有限元节点位移信息代入Zemax 中， 光学系统在9.0 lp/mm 处最终的MTF 依然在0.2 左右，符合设计需求，验证了所设计使用的双层红外 窗口的热光学适应性。 关键词：双层红外窗口；有限元分析；光机热集成；MSC Nastran 中图分类号：TJ06，TH122 文献标识码：A 文章编号：1001-8891(2015)09-0769-05 Analysis of the Effect on Zero Position Detection’s Image Quality Caused by Deformation of Infrared Window WANG Jin-song ，HOU Sheng-ri ，LIU Ming ，CAO Wei-guo，WANG Li-qiu （College of Photo-Electronic Engineering of Changchun University of Science and Technology，Changchun 130022 ，China） Abstract ：This paper analyzed thermal， structural and optical integration of a double infrared window completely, including structure design, finite element analysis and thermal analysis of the optical characteristics. The thermo elastic analysis of mechanical structure system in the axial temperature gradient field is done by using MSC Nastran and Hypermesh. Infrared analysis shows the double window maximum －1 displacement deformation is 1.01 ×10 mm, The finite element nodal displacement information is substituted into the Zemax. The optical system 9.0 lp/mm at the final MTF is still around 0.2, which meets the design requirements, and verifies the suitability of the design of the thermo-optical infrared window. Key words ：double infrared window，finite element analysis，thermal structural optical integration ，MSC Nastran