波峰焊锡渣还原剂试用报告.pptVIP

Solder bar cost reduction 节省锡条成本 Step 1 – Team Project Selection 第一步--团队成立和项目选择 Work cell: 某客户工厂 Model: wave production (no clean lead free)/ 无铅免清洗波峰焊生产线 Team Member/团队成员 Team Leader/组长– XXXX (ME) ME Engineer/ 工程师– XXXXX MFG LM/生产主管 – XXXXX Planner/计划员-XXXX Facility/ 厂务– XXX Problem Statement / Objective/问题描叙和目标 The solder bar utilization rate is low and bring too much solder dross on wave machine, we will try run a solder dross reducer to improve the utilization rate and saving cost. 波峰焊产生很多的锡渣，导致锡条的利用率很低。我们将试用锡渣还原剂来提高锡条利用率并降低成本 Step 2 – schedule 第二步