双踪示波器的电路设计.docVIP

毕业设计说明书（论文）中文摘要 本文对双踪示波器的扫描信号发生器电路进行了研究。首先详细介绍了双踪示波器的显示原理和组成结构。其次，针对扫描信号发生器的特点提出了几种方案加以比对。在此基础上，设计了一种高线性度扫描发生器电路。本设计以弥勒电压发生器为主体并通过扫描发生环的方式来产生扫描锯齿波电压。这种锯齿波电压线性度较好，扫描时间可在一定范围内调节，触发方式有自动、常态和锁定三种方式可供选择。最后，介绍了该电路的装配、调试及故障检修方法。 关键词 示波器 扫描环 锯齿波 波形 PAGE 毕业设计说明书（论文）外文摘要 Title Dual Trace Oscilloscope Circuit Design (b) Scan Generator Circuit Abstract This paper is studied on the double tracer oscilloscope scanning signals generator circuit. Firstly it introduces the?principle and structure of the double tracer oscilloscope. Secondly, it puts forward several proposals to contrast according to the characteristics of scanning signals generator than them. On this basis, it designs a kind of high-linearity scanning generator circuit. This design is composed mainly of maitreya voltage generator?and through scanning?to generate scanning ring saw-tooth wave voltage. This saw-tooth signal wave has good, linearity scanning time, and can be adjusted within certain scope .The way of trigger which could be choose from three aspects, automatically, normal and locking . Finally, it introduces how to assemble the circuit and commissioning the circuit and the method of breakdown maintenance? keyword Oscilloscope Scan Ring Saw-tooth Wave 目 录 1 绪论………………………………………………………………………………………1 2 系统方案论证……………………………………………………………………………3 2.1 示波器中波形显示原理………………………………………………………………3 2.2双踪示波器双通道显示原理………………………………………………………5 2.3模拟示波器的组成……………………………………………………………………9 2.4 扫描信号发生器系统方案选择…………………………………………………13 3电路设计………………………………………………………………………………16 3.1时基闸门………………………………………………………………………………16 3.2扫描电压发生器………………………………………………………………………26 3.3电压比较器…………………………………………………………………………33 3.4 释抑电路 …………………………………………………………………………36 3.5电源电路………………………………………………………………………………42 4 电路的安装与调试……………………………………………………………………45 4.1 电子元件选取………………………………………………………………………45 4.2 焊接电路板的注意事项……………………………………………………………47 4.3 电路的调试…………………………………………………………………………47 4.4 扫描信号发生器常见故障排除……………………………………………………49 结束语……………………………………………………………………………………50 致