基于NRF24L01的室内环境质+量监测报警系统设计与实现.docVIP

  • 14
  • 0
  • 约3.25万字
  • 约 56页
  • 2019-06-13 发布于湖北
  • 举报

基于NRF24L01的室内环境质+量监测报警系统设计与实现.doc

毕业设计、毕业论文 题 目 基于NRF24L01的室内环境质 量监测报警系统设计与实现 学 院 专业班级 指导教师 姓 名 2013年 05月 25日 指导教师签字: 年 月 日 评阅人签字: 年 月 日 摘 要 PAGE I 摘 要 近年来随着科技的飞速发展,单片机应用正在不断地走向深入,同时带动传统控制检测日新月异。在实时检测和自动控制的单片机应用系统中,单片机往往是作为一个核心部件来使用,但仅单片机方面知识是不够的,还应根据具体硬件结构,以及针对具体应用对象特点的软件结合,加以完善。 本设计是以单片机STC89C52为核心设计的各种模块,组合而成的室内环境质量监测报警系统。主要包括气体浓度检测模块、无线通讯模块、报警模块、显示模块、GSM短信模块、按键模块等。系统检测室内中的气体,当有害气体浓度高于设定值时,发出警报,并通过GSM短信把相应情况发送给管理者。管理者接收到相应信息,及时做出相应调整,并且如室内温度不高于设定值,烟雾浓度高于阀值时,控制系统会自行打开室内中的通风装置,降低室内中有害气体的浓度。该设备关键时刻还可以当电话使用。以能够营造一个良好的室内场所。 关键字 单片机;传感器;无线;温湿度;烟雾 Abstract PAGE I Title Based NRF24L01 indoor environmental quality monitoring and alarm system design and implementation Abstract In recent years,with the rapid development of technology,SCM applications are constantly deepening,while driving traditional control testing each passing day.In the real-time detection and automatic control of microcomputer application system,the microcontroller is often used as a core component,but only SCM knowledge is not enough,should be based on the specific hardware architecture,as well as application-specific software features object combined to be improved. This design is a microcontroller as the core design STC89C52 various modules,a combination of indoor environmental quality monitoring alarm system.Including gas concentration detection module,wireless communication module,alarm module,display module,GSM SMS module,keypad module.System detects the gas chamber,when the harmful gas concentrations higher than the set value,an alarm,and through the GSM SMS sent to the administrator of the corresponding case.Managers receive appropriate information in a timely manner and make the appropriate adjustments,and if the indoor temperature is not higher than the set value,the smoke concentration is higher tha

文档评论(0)

1亿VIP精品文档

相关文档