非球面光学零件加工过程仿真设计.pdfVIP

Abstract In this dissertation ，the grinding machine which is designed by the aspheric parts laboratory in Changchun University of Science and Technology based on the tangent rotary method is the simulation object. This method can adequately address the original processing difficulties, and the problem of high cost. With using this virtual simulation system, the machining process can be demonstrated clearly and smoothly. Taking Visual C++ as the platform, and using OpenGL, this powerful cross platform graphical interface, imports the 3D machine model rendering by 3DS MAX. And then, the blank workpiece, grinding wheel are modeling by the OpenGL database with the function of it. So that the virtual machining environment establishment totally completed. Modeling for the machine tool motion, the motion simulation can be done based on the VC++ function . Design a serial port communication module to transfer the real-time data obtained by the grating ruler in the machining process to the virtual simulation system, generate a real-time simulation through the motion module. With the double buffer technique of OpenGL, the virtual machining process is displayed smoothly. The interpersonal interaction interface is established in MFC VC++ framework. Key words ：aspheric optical；virtual machining ；VC++ ；OpenGL 目 录 摘 要 Abstract 目 录IV 第一章 绪 论1 1.1 课题来源 1 1.2 课题研究的目的及意义 1 1.3 虚拟制造及数控仿真 3 1.4 国内外研究现状4 1.5 论文主要研究内容 6 第二章 切线法加工非球面机床及工作原理 7 [23] 2.1 切线回转法加工原理 7 2.2 切线回转法加工非球面数学模型8 2.3 切线回转法加工高次非球面机床 12 2.4 本章小结 12 第三章 系统开发方案与开发平台介绍13 3.1 常用构建虚拟数控仿真系统结构方案 13 3.2 开发平台介绍