8位数码管显示时钟.docVIP

本人依据AT89C51和8位数码管为素材，以最少的见实现最多的功能！ 本程序开机流动显示学号可实现时钟，日历，定时闹钟，秒表等功能！ C程序： #include reg51.h unsigned char led[12]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x40,0x00}; //用一维数组定义-9、横杠、全灭 unsigned char num[12]={2,0,0,9,3,5,0,7,0,1,2,0} ; unsigned char a[8]; unsigned char second=0,minute=0,hour=0,year=0,mon=1,day=1,day1,hsec,sec_m,min_m,N,temp1; unsigned char minute1=0,hour1=0; unsigned char b[8]={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f}; //扫描 unsigned char k=0; unsigned int temp; // 记录毫秒为秒的变量 unsigned char M,S_flag; //M是模式，更新时间的种模式加上正常模式 S_flag闪烁标志 sbit K0=P3^7; //K0是闹钟起停标志位 sbit