检验室执行定量检验的校正与校正验证.pptVIP

測試數據的可比較性(comparability of test results)量測標準追溯(traceability)與能力試驗(proficiency testing) SI 國家A 國家B SI 測試實驗室 測試實驗室 校正實驗室 校正實驗室 國家標準實驗室 國家標準實驗室 比對 比對 關鍵比對(key comparisons) 能力試驗 量測標準追溯 provided by TAF About CAP’s Calibration Verification/Linearity Program Since 1988, the CAP has been offering a comprehensive menu of Calibration Verification/Linearity Surveys (CVL) designed for laboratories to satisfy the requirements for scheduled calibration verification and verification of the analytical measurement range (AMR) as specified in the CAP Laboratory Accreditation Program and Current CLIA Regulations Section 493.1255 for most analytes. (1,2) Calibration Verification/Linearity Surveys Our CVL Surveys provide the most comprehensive menu of analytes and methods that cover broad ranges from near zero to the top of the AMR. Customized reports are provided with an Executive Summary for a quick overview of performance, a detailed evaluation with specific analyte information, and calibration verification/linearity graphs. For more information on the CVL Surveys, including target ranges, refer to the Instrumentation Validation Tools section of the 2012 Surveys Catalog. Calibration Verification/Linearity 敬請指教 * * 檢驗室執行定量檢驗的校正(Calibration)與校正驗證(Calibration Verification) 台北醫學大學 衛生福利部雙和醫院 謝文祥 名稱與定義From Wikipedia, the free encyclopedia Calibration(校正) is a comparison between measurements – one of known magnitude or correctness made or set with one device and another measurement made in as similar a way as possible with a second device. The device with the known or assigned correctness is called the standard. The second device is the unit under test, test instrument, or any of several other names for the device being calibrated. 名稱與定義From Wikipedia, the free encyclopedia Verification(驗證) and Validation(確認) are independent procedures that are used together for checking that a product, service, or system meets requirements and specifications and that it fulfills its intended p