给排水管网毕业设计.docVIP

学号: 毕业设计 （ 2008 届） 题 目： 排水系统设计 学 生： 学院（系）：环境与安全工程学院 专 业 班 级： 给排水042 校内指导教师： 专业技术职务： 副教授 校外指导老师： 专业技术职务： 工程师  摘要：此设计为厂区污水及雨水管道工程设计。采用雨水和污水分流的排水体制，使雨水和污水分别在不同的管道系统中收集排放。废弃了原有的旧管网，重新布置排水管线，增强了厂区管网的输水排水能力，为生产提供便利。本设计共有四块：雨水管网设计，污水管网设计，污水提升泵站设计，同时还包括污水管网的预算书。工厂的地下管线复杂，设计中采用了雨水污水分别布置，分别布置于道路两侧的办法，使原有的道路不致破坏，同时减少了与煤气、给水、通信电缆等其他管线的交叉。本工程中污水管道总投资为4336803.09元，雨水总投资约386175元。 关键词：排水管网　　分流制排水系统　　工程预算 、 Abstract：This is designed to the factory of Qi shuyuan’ sewage and rain water pipeline project design. Use of sewage and rain drainage diversion system, so that rainwater and sewage pipes in a different system of collection and disposal. Abandoned the original old pipe network and re-arrange the drain pipes. It enhanced the plants water drainage pipe network capacity and provides convenience for the production. The design has a total of four parts: rainwater pipe network design, sewage pipe network design, and upgrade sewage pumping station design, also include sewage pipe network on the budget. The underground pipeline factory complex, storm water and sewage decorated method were Used in the design. Storm water pipes and sewage pipes were arranged in both sides of the road. It will not make the original road damage, while reducing the cross with gas, water supply, communication cables, and other pipeline. The sewage project has a total investment of 4336803.09 Yuan; rainwater network has a total invest