钢筋混凝土材料性能与受弯构件的延性.PDF

第 32 卷第 1 期 建 　筑 　技 　术 　开 　发 Vol. 32 ,No. 1 2005 年 1 月 Building Technique Development Jan. 2005 钢筋混凝土材料性能与受弯构件的延性 1 2 1 张利梅 　赵顺波 　黄承逵 ( 1. 大连理工大学土木水利学院 ,大连 116023 ;2. 华北水利水电学院 ,郑州 450011) [摘 　要] 　推导出钢筋混凝土受弯构件的截面曲率延性系数的理论计算公式 ,分析了混凝土强度和极限压应变、钢筋强 度和均匀伸长率及配筋特征值等参数对构件截面延性的影响规律 ;提出了保证钢筋混凝土受弯构件发生延 性破坏时受拉钢筋的最小均匀伸长率及钢筋和混凝土同时达到极限拉、压应变的临界配筋率 ,给出了按照现 行混凝土结构设计规范规定计算的钢筋混凝土受弯构件截面曲率延性水平 ;对工程设计应用具有重要的参 考价值。 [ 关键词] 　钢筋混凝土 ;受弯构件 ; 曲率延性;钢筋均匀延伸率 ( ) [ 中图分类号] 　TU375 　　　　[文献标识码] 　A 　　　　[文章编号] 　1001523X 2005 MATERIALS PROPERTIES OF STEEL REINFORCED CONCRETE AND DUCTILITY OF FLEXURAL MEMBERS Zhang Limei 　Zhao Shunbo 　Huang Chengkui [Abstract ] 　Based on the plane section presumption and the Design Code for Concrete Structure ( GB500102002) , the curvature ductility factor of reinforced concrete flexural member is given out. The influence on the section ductility of the strength and ultimate compressed strain of concrete , the yield strength and even percentage elongation of reinforcement , and the reinforced characteristic value is discussed. The least even percentage elongation and balanced reinforcement ratio that can assure the bending members do not cause destruction of the bar’s rip is given on condition that different concrete strength.