实验室温湿度监控系统的设计论文.docVIP

实验室温湿度监控系统的设计论文 实验室温湿度系统的设计 摘 要 本文主要介绍了温湿度的检测包括温度传感器湿度传感器单片机接口及其应用软件的设计大体分为以下几大部分介绍了国内外温湿度检测及监控技术并且分析了温度检测及监控技术的未来发展方向 本系统是基于复合式温湿度传感器SHT11单片机AT8951 对温度湿度分别测量并通过液晶显示屏1602经行显示本系统由上位机和下位机构成下位机主要完成温湿度的采集与处理将其传至1602液晶显示并做出判断实现超限报警同时下位机还通过 RS232 总线将温湿度数据传至上位机上位机可实时显示当前的温度与湿度值本系统具有可读性高稳定性高反应速度快测量值准确的特点该系统电路简单工作稳定集成度高测试精度高具有一定的实用价值 温湿度检测是以8051单片机系统和温湿度相结合的温度测量系统本系统的数学模型合理测量方法容易实现实际仪器采用抗干扰零漂低温漂的电子元件性能稳定该测量仪总体特点是使用简便实用使用对象广并且实现了自动化 关键词温度测量湿度测量数据采集单片机 The Design of Temperature and Humidity Monitoring System in Laboratory AbstractIn this paper including temperature and humidity testing temperature sensors humidity sensors microcontroller interfaces and application software design It can be divided into the following parts introduction of temperature and humidity detection technology at home and abroad and analysis of the future of temperature measurement technologies development The system is based on the combined temperature and humidity sensor SHT11 monolithic integrated circuit AT89C51 surveys separately to the temperature humidity and demonstrated through the liquid crystal display monitor 1602 silk thread business This system consists of upper and lower body slave machine is complete the acquisition and processing of temperature and humidity then pass them to the 1602 LCD display and judge the ultra limit alarm At the same time lower computer through RS232 bus is rumored to first degree temperature and humidity machine PC can show the current temperature and humidity values This system has a high readability high stability reaction speed measurement accuracy of characteristics The circuit is simple stable and high integration of the system high accuracy have practical value  Temperature and humidity detection system is base on 8051 the combination of temperature and humidity the temperature measurement system The system mathematical model is reasonable easy measurement The actual instruments used anti-interference low zero-drift low temp