数控技术应用专业英语 第三版 PPT课件 LS2LS2 2.pptVIP

大连理工大学出版社 数控技术应用专业英语 数控技术应用专业英语大连理工大学出版社李桂云 冯艳宏主编 Learning Situation 2 CNC Machining Center Task 2 Process Analysis of CNC Machining Center Part A Technical Reading 1 Part B Practice activity 2 Part C Broaden your horizon 3 Task 2 Process Analysis of CNC MC Task 2 Process Analysis of CNC Machining Center 1. Reading Part Drawing 2. Preparing for Process Analysis 3. Machining Process Part A Technical Reading 1  1.Reading Part Drawing 2. Preparing for Process Analysis （1）Tools selection Workpiece is clamped on the machine vise with dial test indicator calibrated. Touch point sensor is used to X/Y tool setting; Z -zero -setter is used to Z tool setting. 工件装夹在机用虎钳上，机用虎钳用百分表校正， X、Y方向用寻边器对刀， Z方向用 Z 轴设定器对刀。 2. Preparing for Process Analysis （2）Measuring tools selection Outline dimensions are measured with vernier caliper. Depth dimensions are measured with depth vernier caliper. The holes are measured with an inside micrometer. 外轮廓尺寸用游标卡尺测量;深度用深度游标卡尺测量;内孔用内径千分尺测量。 2. Preparing for Process Analysis （3）Cutters selection The face milling cutter is used to milling of the upper surface， keyway cutters are used to machine contour. Holes are drilled with the center drill， twist drill and reamer. 上表面铣削用面铣刀;轮廓加工用键槽铣刀;孔加工用中心钻、麻花钻及铰刀。 2. Preparing for Process Analysis （4）Milling mode selection There are two ways of peripheral milling, climb milling and conventional milling. 铣削方式有两种：一种是顺铣，外另一种是逆铣。 For climb milling, the rotational direction of the milling cutter is same as the direction of cutting feed. If the rotational direction of the milling cutter is opposite 顺铣：即铣削时铣刀的旋转方向与切削进给方向相同；逆铣，即铣削时铣刀的旋转方向与切削进给方向相反。 2. Preparing for Process Analysis In case of spindle running forward, the tool path is clockwise around the outer contour of workpiece, it is climb milling. If the tool path is counterclockwise, it is conventional milling. On the contrary, when milling inner contour of the workpiece, if the tool path is c