ICEM-CFD 四面体网格模块Tetra介绍.ppt

* After all the students have finished the family definition, the instructor can quickly repeat the process on the screen, or elect to load a tetin file where that had already been done. Come back to the lecture material for a brief explanation of how natural size is used. Students could follow along on their screen. * * These steps will be done on-screen with the students following along. These slides are for the students reference. * * * * 活塞阀的几何外形 设置和上一个例子相似 创建族 入口 port seat 阀 圆柱 创建材料点，live 分配网格参数 对于这个练习，使用显示实体参数不使用自然尺寸。 Using Thin Cuts 为两个曲面之间较薄区域划分网格 所谓的薄是相对指定的四面体尺寸而言的 define thin cut, two surfaces in different families 如果曲面相交，曲线应该在第三个族中 某一族中的曲面 第二个族中的曲面 两个区面的交界曲线 在第三个族中 Using Thin Cuts To define Thin cut 选择Mesh params , Model 选择Define thin cuts 选择Select select families in thin cut select Add 网格编辑 对于局部有问题的区域，Tetra有很多进行交互网格编辑的功能 编辑节点 编辑单元 编辑边缘 例子 改变族 Element assigned to wrong family, change family from ‘valve’ to ‘port’ 使用子集 网格的灵活显示 Cut plane, select: Display subset 修改 Cut plane, Z 选择Live family 选择Tetra_4 点击Reset adjust location slider 使用子集 Local areas can be examined Use Restrict to display selected element Use Layers: Add to show adjacent elements by family and type: use All F, all T ICEM CFD Prism介绍 Prism程序 从ICEM CFD Tetra网格开始 批处理程序 在边界界面产生棱柱（五面体）单元 通过拉伸曲面网格产生棱柱 Prisms are made conformal with tetrahedral volume mesh 光滑产生必要的质量 Prism功能 最小化用户所需要的输入 通过族增加棱柱层 每一个族可以有唯一的一个棱柱属性 Filing of parameters for later use Prism layers within specific volumes only Smoothing in surface normal direction to handle sharp corners 示例实践 为球和立方体增加棱柱层 设定棱柱选项 初始高度 高度比 层的数量 Use default Max smoothing steps For surface normals Set Tri smoothing steps to 0 You should have a smooth tetra mesh before running prism! Leave Tetra smoothing steps as default Select families for prisms Optionally set height and ratio for each family Prism Options – Fillet Ratio Blends prism grid lines around sharp corners 0 = no fillet 1 = fillet radius equals prism height Fillet Ratio = 0.0 Fil