环氧自流平地坪工程施工组织设计方案.docVIP

5mm环氧地坪施工 Epoxy Selfleveling 环氧自流平 The following flooring system is specially recommended: 特别推荐以下地面系统： Sikafloor Sikafloor? 263SL Epoxy self leveling system 环氧自流平系统 Approx. 5 mm coating thickness 涂装厚度约 5 mm Sikafloor? 263SL is a seamless, self-smoothing, screed, flooring system based on advanced solvent-free epoxy system and selected graded fillers. The cured floor exhibits excellent resistance to abrasion and finishes to a smooth, impervious surface that can be easily maintained in a hygienic condition. Sikafloor? 263SL 是一种无接缝、自流平或砂浆环氧系统，它以一种先进的无溶剂环氧树脂为基料，并采用专门级配的填充料。该地面具有出色的耐磨损性。其表面形成光滑的无渗透的地面，易于保持卫生状态 Performance 性能: ☆ Solvent free product，achieve LEED and approved for food industry. 无溶剂环氧材料，满足LEED认证要求，可用于食品工业。 ☆ Good mechanical resistance 良好的抗机械磨损能力 ☆ Good chemical resistant（according to “Chemical resistance for Sikafloor resin based products”） 良好的耐化学品腐蚀性（参照耐《西卡环氧地坪产品耐化学腐蚀表》） High level of aesthetics and easy to clean 高度美观，易清洗 ☆ Comfort and care 舒适，安全 ☆ Smooth and seamless 光滑，无缝 Structure Profile 系统结构图: 找平层 找平层Levelling layer (optional) 底漆Primer 混凝土Concrete 面层Top-coat System Description 系统介绍： Step步骤 Product Consumption产品和用量 Application Method施工方法 Surface Preparation: 基层处理 Cleaning, grinding and shot blasting清理，研磨和喷砂处理 Primer:底漆 Sikafloor 156 @ 0.4 kg/m2 +SikaDur 505Q @ 0.4 kg/m2 Trowel, roller刮板，滚筒 Levelling layer (optional) 找平层（可选） Sikafloor 263SL @ 3 kg/m2 +SikaDur 505Q @ 3 kg/m2 Trowel,刮板 Top-coat面层 Sikafloor 263SL @ 1.8 kg/m2 +SikaDur 505Q @ 1.8 kg/m2 Trowel刮板 Inspection Substrate Quality 基面质量检查 Check the substrate quality whether achieve below substrate requirements. 检查混凝土基面是否满足如下基面要求 The concrete substrate must be sound (Layer Thickness≥70mm) and of sufficient compressive strength (minimum 25 N/mm2) with a minimum pull off strength of 1.5 N/mm2. 混凝土基面必须密实（层厚不低于70mm）和有足够的抗压强度（最小25 N/mm2），最小抗拉强度为1.5 N/mm2。 A waterproofing layer must be installed under the concrete base，or vapor going up will result in e