APC全线制冷产品.pptVIP

* * * Slide intent: Presentation/Family introduction. Notes for the presenter: 20 minute presentation. InfraStruXure CDU family is part of InfrastruXure Cooling Solutions for medium to large data center applications InfrastruXure CDU provides distribution and management of cooling fluid. Modular construction allows flexibility and adaptability The scalable design of the InfraStruXure CDU enables customers to meet the changing needs of their environments. * One inch diameter pex-Al-pex with crimped connection unions. Pipes will be a standard APC sku. Makes addition of future IR17 units easy. * Slide intent: Provide overview of the Product Family design and main feature/benefits Notes for the presenter: Direction: Clockwise beginning with the Isolation and Balancing Valve Opening Comments Easy to install (or move if required) since it ships pre-configured with circuit isolation valves Water or Glycol, 1 to 12 InRow RC support, Top or Bottom Piping Configuration. Isolation and Balancing Valve: These valves allow individual circuit isolation and provide a means to balance the flow of fluid to multiple CRAC units. Main Supply and Return Headers: Provides a point of connection fo the main supply and return lines to and from the chiller. Pre-configured with 12 distribution lines, which allows scalability from 1 to 12 In-Row RC’s Individual Supply and Return Lines: Individual lines that allow for independent fluid circuiting for each CRAC. These lines provide the last point of connection between the CDU and the CRAC to reduce the risk of leaks within the datacenter. Top or Bottom Piping Connections The main supply and return connections provide the customer with the flexibility to install the piping from the chiller without the concern of the CDU connections The individual supply and return connections can be configured for top or bottom piping, Note: The individual supply and return connection location must be defined when the order is placed. * (Note: for less ex