EN 1780-1(2003) 铝和铝合金 再熔化母合金和铸件用合金铝铸锭标识 第1部 分.pdfVIP

DEUTSCHE NORM January 2003 Aluminium and aluminium alloys Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 1: Numerical designation system EN 1780-1 English version of DIN EN 1780-1 ICS 77.150.10 Supersedes February 1997 edition. Aluminium und Aluminiumlegierungen – Bezeichnung von legiertem Aluminium in Masseln, Vorlegierungen und Gussstücken – Teil 1: Numerisches Bezeichnungssystem European Standard EN 1780-1 : 2002 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 132 ‘Aluminium and aluminium alloys’ (Secretariat: France). The responsible German body involved in its preparation was the Normenausschuss Nichteisenmetalle (Nonferrous Metals Standards Committee), Technical Committee Hüttenaluminium . Amendments This standard differs from the February 1997 edition in that unalloyed aluminium ingots are no longer covered. Previous editions DIN 17007-4: 1960-08, 1963-07; DIN EN 1780-1: 1997-02. EN comprises 5 pages. © No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN 1780-1 : 2003-01 DIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 B