EN 1780-3(2002) 铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第3部分 .pdfVIP

DEUTSCHE NORM January 2003 Aluminium and aluminium alloys Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 3: Writing rules for chemical composition EN 1780-3 English version of DIN EN 1780-3 ICS 77.150.10 Supersedes February 1997 edition. Aluminium und Aluminiumlegierungen – Bezeichnung von legiertem Aluminium in Masseln, Vorlegierungen und Gussstücken – Teil 3: Schreibregeln für die chemische Zusammensetzung European Standard EN 1780-3 : 2002 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 132 ‘Aluminium and aluminium alloys’ (Secretariat: France). The responsible German body involved in its preparation was the Normenausschuss Nichteisenmetalle (Nonferrous Metals Standards Committee), Technical Committee Hüttenaluminium . Amendments This standard differs from the February 1997 edition in that unalloyed aluminium ingots are no longer covered. Previous edition DIN EN 1780-3: 1997-02. EN comprises 4 pages. © No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN 1780-3 : 2003-01 DIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,