离心泵CFX流场分析教程.pptVIP

Workshop 5Cavitating Centrifugal Pump;Introduction;Start Workbench and save the project as centrifugalpump.wbpj Drag CFX into the Project Schematic from the Component Systems toolbox Start CFX-Pre by double clicking Setup When CFX-Pre opens, import the mesh by right-clicking on Mesh and selecting Import Mesh ICEM CFD Browse to pump.cfx5 Keep Mesh units in m Click Open;Modifying the material properties: Expand Materials in the Outline tree Double-click Water On the Material Properties tab change Density to 1000 [kg/m3] Change Dynamic Viscosity to 0.001 [kg m^-1 s^-1] under Transport Proper