确定挖掘阻力关键因素值与方法的研究-JournalofNortheastern.pdf

第31卷第12期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol31,No. 12 2010 年 12 月 Journal of Northeastern niversity( Natural Science) Dec. 2 0 10 1 2 1 林贵瑜 , 李爱峰 , 李奎贤 ( 1. , 110004; 2. , 030024) : , , ,, ,; ,, : ;; ;; : TG 335.58 : A : 1005-3026( 2010) 12-1761-04 Key Factor Value and Method to Determine Digging Resistance 1 2 1 LIN Gui-yu , LI A i-f eng , LI Kui-xian ( 1. School of Mechanical Engineering Automation, Northeastern niversity, Shenyang 110004, China; 2. T aiyuan Heavy Industry Co. Ltd., Taiyuan 030024, China. Correspondent: LIN Gui-yu, E-mail: gylin @ mail.neu.edu.cn) Abstract: How to determine the digging depth is the key factor and also a problem which is often difficult to be tackled in determining the digging resistance for the ore piles and the piles after blasting. Based on the typical digging process for a blasted ore pile and the principle that the volume digged by a shovel dipper is equal to the volume of the dipper, a mathematical model is developed of digging depth with an equation of digging path given. Then, the mathematical relationship between the maximum digging depth and inside width of dipper is given on the extreme principle, which is in conformity to the measured values. Furthermore, the digging resistance and its maximum value in the whole digging process areboth given. In this way anew method is proposed to determine the key factor value of digging resistance, thus providing a reliable reference for determining other mechanical parameters. Key words: mechanical design; shovel; soil digging theory; digging path; digging depth , , ,