苏州太平金澄家园三期安置房7# .docVIP

粉 STYLEREF 标题 1 PAGE II 四川理工学院学 第 PAGE 28 页 共 NUMPAGES 130 页 毕业论文 课题：苏州太平金澄家园三期安置房7# 专 业 建 筑 工 程 技 术 学生姓名 学 号 指导教师 完成日期 江阴职业技术学院毕业设计（论文） PAGE I 目录 摘要 本工程为苏州市太平金澄家园三期安置房，系民用建筑，十八层剪力墙结构，抗震烈度为六度，耐火等级为一级，总建筑面积为7963.03平方米。 本课题部分组成：工程计算书、工程量清单、钢筋下料单、横道图、现场平面施工图、施工组织设计。 工程量计算按施工工序进行，同时根据计算结果查相应定额，确定各工序的劳动量，作为施工进度安排之理论依据，钢筋下料单是根据平法施工图进行设计的，主要用于指导施工人员在现场施工，准确进行钢筋放样工作。施工组织设计是根据现行有关政府部门签发的相关规范，拟建项目现场勘察情况和我公司同类工程施工经验，进行编写，主要目的是为指导施工进度的有效实施。 关键词：工程计算书、工程量清单、钢筋下料单、横道图、现场平面施工图、施工组织设计 Abstract PAGE II Abstract This project is the Taixing South Sanhuan south block housing project No. 15, Department of civil building, eighteen floor shear wall structure, seismic intensity of seven degrees, fire-resistant grade level, a total construction area of 13592.09 square meters. The subject part: engineering calculation, engineering quantity list, reinforced material, bar charts, on-site construction drawing plane, the construction organization design. According to the construction process of engineering quantity calculation, at the same time, according to the result of calculation check corresponding quota, determining the amount of labor of each working procedure, as the theory basis of construction schedule, the reinforced material is based on the design of construction drawing plane method, mainly used for guiding the construction personnel at the scene construction, accurate reinforced lofting. Construction organization design is according to the relevant norms issued by the current of the relevant government departments, the project site survey and our similar construction experience, the preparation, the main purpose is for the effective implementation of the guidance of construction schedule. Keywords: engineering calculation, engineering quantity list, reinforced material, bar charts, on-site construction drawing plane, the construction organization design 江阴职业技术学院毕业设计（论文） PAGE III 目录 目录 江阴