产3000吨的环氧树脂涂料的毕业设计方案.docVIP

PAGE 摘 要：本设计首先阐述了环氧树脂的结构特性和和应用，同时也阐述了以环氧树脂为成膜物质的环氧树脂涂料的特殊性能，应用范围以及一些特殊领域。然后根据环氧树脂的特性设计一配方，通过选择了的独特的方式，同时选择合适的生产方法，来设计生产一种优良的附着力、抗化学品性能优良、韧性好、具有优良的电绝缘性质、防腐蚀性强的环氧树脂涂料。环氧树脂中含有芳香醚键，漆膜经日光（紫外线）照射后易降解断链，所以户外耐候性较差。故通常的双酚A系环氧树脂不耐户外日晒，漆膜易失光变色，然后粉化，不宜用作户外的面漆。然后根据厂里现有的环境布置，供有的各种数据和现有设备，以及各种资料。根据涂料的基本的生产工艺进行设计一个年产3000吨的环氧树脂涂料的生产任务。并写出设计体会。 关键词：环氧树脂 涂料 设计 Abstract：The design of the first expounded the characteristics and the structure of epoxy resin and application, but also on a film of epoxy resin material for the special epoxy coating performance, and the application of some special areas. According to the characteristics of epoxy resin and then design a formula, by choosing a unique way, and choose a suitable production methods, to design a fine production of adhesion, anti-chemical excellent performance, good toughness, has excellent insulation, Nature, the strong anti-corrosion epoxy paint. Epoxy resin containing aromatic ether bond, film, as sunlight (UV) radiation easily degradable Duanlian, outdoor weathering of the poor. Bisphenol A is usually the outdoor sun and intolerant of epoxy resin, film-loss-change, and then powder, it is not appropriate for outdoor finish. According to the factory and the existing layout environment for all kinds of data and some existing equipment, and all kinds of information. According to paint the basic design of a production process with an annual output of 3,000 tons of epoxy resin coating production tasks. Experience of writing and design. Keywords: Epoxy paint design 目录 1 总论 1 1.1设计任务 1 1.2产品简介 1 1.2.1产品结构特性简介 1 1.2.2环氧树脂涂料的应用 2 1.2.3设计生产的涂料的介绍 2 1.2.4产品配方 4 1.3工厂总平面设计 4 1.3.1工厂位置介绍 4 1.3.2配方原材料来源介绍 4 1.3.3水电器来源 4 1.3.4平面布置 4 2 生产方式选择 5 2.1树脂的选择 5 2.2树脂的制备 5 3 工艺流程简介 5 3.1前期原材料的制备 5 3.1.1环氧树脂液的生产 6 3.1.2防沉浆的生产 7 3.2涂料的生产 7 3.2.1涂料的配料 7 3.2.2涂料的预混合 7 3.2.3涂料的研磨分散 8 3.2.4涂料的调色 8 3.2.5涂料的过滤包装 8 4 初步的物料衡算 8 5 主要设备的计算 11 5.1反应釜的计算 11