毕业设计（论文）-基于2.4G的无线遥控台灯的设计与实现.docx

河南农业大学 本科生毕业论文 题 目 基于2.4G的无线遥控台灯的 设计与实现 学 院 理学院 专业班级 12级电子信息科学与技术4班 学生姓名 指导教师 撰写日期： 2016年 5月 28日 河南农业大学理学院本科毕业论文 基于2.4g无线遥控台灯的设计与实现 全套设计加扣?3012250582 摘要 进入21世纪，人类在无线电数据传输领域已经非常成熟，其中2.4G波段在我们的生活中是最常见的一种波段之一，比如蓝牙模块，2.4g无线遥控器等。最近几年，2.4G与我们联系的愈发紧密，相对于红外线、433信号来说，抗干扰性和穿透性更强，以后会越来越多的应用的智能家居中，为人类的生活提供诸多方便。目前市场上有很多专门的2.4G收发芯片，其中上海链接电子设备有限公司设计的LT8900系列是最常用的一款之一。本设计设计选用了LT8920的2.4G芯片，MCU选用台湾应广的PMC153系列，设计一款能够取代红外线的遥控系统。本系统分为收发两个部分，遥控器作为RF发射部分，高亮LED台灯作为RF接收部分。并使用C与汇编语言混合对其编程，使用SPI通信协议。遥控器以2.4G无线信号为载波发射按键码，接收器对2.4G载波进行解密，得出按键码，MCU根据解密得出的按键码对LED进行PWM控制。从而达到无线遥控的目的。 关键词：2.4G；PMC153；SPI；PWM  Design and Implementation of 2.4g Wireless Remote Control Lamp Based He ZuGuang Abstract In the 21st century, people in the radio field of data transmission has been very mature, where 2.4G band is one of the most common band in our lives, such as Bluetooth module, 2.4g wireless remote control. In recent years, 2.4G Contacts increasingly close, with respect to the infrared, 433 signals, interference and more penetrating, the future will be more and more smart home application, for human life It provides a lot of convenience. There are many special 2.4G transceiver chip on the market today, which links Shanghai Electronic Equipment Co., Ltd. design LT8900 series is one of the most commonly used one. The design chosen LT8920 design of 2.4G chips, MCU used in Taiwan should be widely PMC153 series, designed to replace an infrared remote control system. The system is divided into two parts transceivers, remote control as an RF transmitter section, highlight LED lamp as RF receiving portion. And use C and assembly language programming mix them, using the SPI communication protocol. 2.4G wireless remote control to key code signal carrier transmitter, the receiver of 2.4G carrier decrypt obtain key code, MCU according to the decryption key code d