一种基于ANSYS 和FLUENT 的管壳式换热器整体分析方法.pdfVIP

2008 年用户年会论文 一种基于ANSYS 和FLUENT 的管壳式换热器整体分析方法 郭崇志 林长青 （华南理工大学，广州 510640 ） 摘要：本文从计算流体力学与传热的角度出发，利用 FLUENT 软件进行换热器流体流动与传热的数值模拟。然后把 FLUENT 软件的温度场数值模拟结果导入 ANSYS 中作节点插值，作为进行换热器的热分析以及结构分析的边界条件。实现了管壳式 换热器的 FLUENT 和 ANSYS 联合仿真模拟，综合整个过程可以很好地完成同一条件下进行流体力学以及传热性能和换热器 结构性能相结合的分析模拟。从换热器流体力学及传热的角度得到了有限元结构分析所需要的准确的温度分布。为研究换热 器的温差变形及其热应力，评估热应力的危害性提供了保证。 关键词：FLUENT; ANSYS; 温度场; 热应力; 换热器 An Integrated Analysis Method of Shell Tube Heat Exchanger Based on ANSYS and FLUENT Guo Chongzhi Lin Changqing （South China University of Technology Guangzhou 510640 ） Abstract: An analysis simulation method based on FLUENT and ANSYS, which was used to conducted thermal analysis and thermal stress analysis on the whole heat exchanger, realized FLUENT and ANSYS united emulation simulation. First, use FLUENT to conduct fluid flow and heat transfer numerical simulation of exchanger from the angle of computation fluid mechanics and heat transfer. Then transform result data of temperature field from FLUENT simulation to ANSYS to achieve node interpolation. So we obtain boundary conditions in thermal analysis and thermal stress analysis is needed. After that we can carry out finite element analysis in ANSYS. Synthesize the whole process that can complete an analysis simulation which combined hydrodynamics with structure performance of heat exchanger in the same condition successfully. Analysis result shows that this is an effective analysis method. Data transformation process between software’s has hardly any inaccuracy. Analysis result in accordance with the situation when heat exchanger is in operational status. It is ensure the correctness to study thermal stress and the thermal stress harm. So combine