MIL-T-6845D管，钢，耐腐蚀（S30400），航空车辆液压系统18硬件条件.pdf

Downloaded from on 2009-03-30T3:01:00. MIL-T-6845D 26 Awil 1985 SUPERSEDING MIL-T-6845C 21 September 1966 MILITARY SPECIFICATION TUBING; STEEL, CORROSION-RESISTANT pcJ4DLv;LvT10N AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 This specification is aDDPOVr2d. fOr use bv all Depart- ments and Agencies of the Department of befense.’ I. SCOPE 1:1 ,% This spacification presents requirements for thin-walled (lnsl e lameter greater than four times the wall thickness and outside diameter 1/4 inch and larger) corrosion-resistant steel tubing in approximately the 1/8 hard condition, of special quality, suitable for use in high-pressure hydraulic systems. 1.2 Classification. Tubing shal1 be furnished in the following types and classes. ,Unless otherwise specified, either of the types and classes indicated”may be furnished at the option of the contractor, provided that al1 material furnished on an individual order shal1 be of one type and- class only, anufacturing process type Type I - Seamless Type II - Melded and drawn Ultrasonic Class, Type 11 only Class 1 - 0.125 inch length ultrasonic calibration standard Class 2 - 0.060 inch length ultrasonic calibration standard Class 3 - Ultrasonic testing not required Beneficial comments (recommendations,additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: AFkJAL/MLSE,Mater