材料与试验协会 A537、A537M-2006 压力容器用经热处理的碳锰硅钢板.pdf

Designation: A 537/A 537M – 06 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese- Silicon Steel1 This standard is issued under the fixed designation A 537/A 537M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope* 1.4 The values stated in either inch-pound units or SI units 1.1 This specification2 covers heat-treated carbon- are to be regarded separately as standard. Within the text, the manganese-silicon steel plates intended for fusion welded SI units are shown in brackets. The values stated in each pressure vessels and structures. system are not exact equivalents; therefore, each system is to 1.2 Plates furnished under this specification are available in be used independently of the other without combining values in the following three classes: any way. Yield Tensile 2. Referenced Documents Strengt