锅炉各转动机械轴承冷却水系统课件.pptVIP

锅炉各转动机械轴承冷却水系统 Boiler rotary mechanical bearing Cooling water system 1.2 一次风机的调试与运行 1.2 Commissioning and operation of primary air fan 1.2.1 一次风机调试前的准备工作 1.2.1 Preparation before commissioning of primary air fan 1) 详细检查所有螺栓是否紧固。 1） Detailedly inspect whether all bolts are tightened or not. 2) 检查叶轮、进口导叶调节门与电动机的旋转方向是否正确。 2) Inspect whether the rotation directions of impeller, adjustable valve of inlet impeller and motor are correct or not. 3) 检查机壳、进气箱和进出口管道是否遗留下杂物。 3) Inspect whether foreign matters are left at the shell, air intake box and inlet /outlet pipe or not. 4) 检查仪表连接是否正确。 4) Inspect whether the connection of instrument is correct or not. 5) 在调节门处于关闭位置的情况下，检查调节杆的位置是否正确，调节门的相邻叶片必须接触，如果检查下来相邻叶片不互相接触，必须加以调整和固定。 5) Under the condition that the adjustable valve is closed, inspect whether the position of adjustable rod is correct or not. The adjacent blades of adjustable valve must contact each other. If the adjacent blades do not contact each other after inspection, they must be adjusted and fixed. 6) 调节门的设计方向与叶轮的旋转方向相同，即在调节门关闭的情况 下，介质的预流动方向与叶轮的旋转方向相同。 6) The design direction of adjustable valve is the same as rotary direction of impeller, that is to say, under the condition that the adjustable valve is closed, the preflowing direction of medium is the same as rotation direction of impeller. 7) 必须对传动机构联杆长度进行调节，保证电动执行机构的行程要满足调节门全开和全闭的需要。 7) It must adjust the length of link rod of actuator to ensure the stroking of electric motor actuator should tally with the demands of full opening or full closing of adjustable valve. 8) 在风机启动之前，调节门必须关闭。 8) The adjustable valve must be closed before the fan is started up. 1.2.2 一次风机导叶调节门传动机构的调试 1.2.2 Commissioning of driving mechanism of guide vane adjustable valve of primary air fan 1) 在调节门处于关闭位置的情况下，检查调节杆的位置是否正确， 规定调节门的相邻叶片必须接触，如果检查下来相邻叶片不互相接触，必须加以调整和固定。 1) Under the condition that the adjustable valve is closed, inspect whether the position of adjustable rod is correct or not. Prescribe that