大跨度预应力混凝土梁板高大模架施工技术.pdfVIP

340· 建 筑 技 术 第42卷第4期 2011年4月 · Architecture Technoloaw Vo1．42 No．4 ADr．201 1 大跨度预应力混凝土梁板高大模架施工技术 陈彤瑾 (北京市第三建筑工程有限公司，100044，北京) 摘 要：某工程内设游泳馆，游泳馆顶板、梁高大模架的搭设采用碗口式与扣件式组合形式的满堂式脚手 架，属高大模架支撑体系，分别对主梁、次梁进行模板设计，运用套支格构形式，设计顶板模板，保证和控制高大 模架搭设过程中的检查验收要点和安全防护要点以及模架拆除要点，经过施工监测，支撑系统在施工过程中整 体变形最大值为9 mm，满足要求。 关键词：大跨度；预应力混凝土；高大模架；套支格构；过程检查；模板拆除 中图分类号：TU 755．22 文献标识码：B 文章编号：1000—4726(2011)04—0340—04 CONSTRUCTIoN TECHNIQUE OF HIGH AND LARGE FORMWORK 0F WIDE-SPAN PRIESTRESSED CONCRETE BEAM SLAB CHEN Tong-jin (Beijing No．3 Construction Co．，Ltd．，100044，Beijing，China) Abstract：Swimming poo l is designed in an engineering．Multi-rank scaffold with combination of cuplok scaffold and fastener scaffold is adopted to erect the ceiling and high and large beam formwork of the swimming poo1．Considering that this is a high and large formwork support system，formworks of main beam and junior beam are designed respectively．Supporting lattice is adopted and ceiling formwork is designed to ensure and control the key points in inspection，acceptance，safety protection and formwork flame dismantlement during erection of high and large formwork support．It is monitored in construction that the maximum integral deformation of the supposing system is 9 mm and it satisfies the requirements． Key words：wide span；prestressed concrete；high and large formwork support；supporting lattice；process inspection；formwork dismantlement 下均垫底座，底座下设垫板。 1 工程概况 (2)顶托选择。顶部设可调U形顶托支顶，丝杠伸 公安部招待所及警察技能用房工程总建筑面积