喷丸强化对ZK60镁合金高周疲劳性能的影响-中国有色金属学报.pdf

19 10 2009 10 Vol.19 No.10 The Chinese Journal of Nonferrous Metals Oct. 2009 1004-0609(2009)10-1733-08 ZK60 1, 2 1 3 1 1, 2 (1. 200240 2. 200240 3. Lehrstuhl Metallkunde und Werkstofftechnik, BTU-Cottbus, Postfach 101344, D-03013 Cottbus, Germany) ZK60 ZK60(N)0.05 mmZK60 140 MPa180 MPa29%ZK60 ZK60 TG 113.25+5; TG 178 A Influence of shot peening on high cycle fatigue properties of ZK60 magnesium alloy 1, 2 1 3 1 1, 2 LIU Wen-cai , DONG Jie , ZHANG Ping , ZHAI Chun-quan , DING Wen-jiang (1. National Engineering Research Center of Light Alloy Net Forming, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China; 2. Key State Laboratory of Metal Matrix Composite, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China; 3. Lehrstuhl Metallkunde und Werkstofftechnik, BTU-Cottbus, Postfach 101344, D-03013 Cottbus, Germany) Abstract: The influence of shot peening on the microstructure of surface layer and high cycle fatigue properties of high-strength wrought ZK60 magnesium alloy was studied. The results show that shot peening effectively improve the fatigue properties. Both the surface microstructure and texture of ZK60 magnesium alloy change greatly after shot peening. The fatigue limit increases from 140 to 180 MPa after shot peening with the optimum Almen intensity of 0.05 mm, the improvement of 29% in fatigue limit is achieved, and