石灰窑除尘系统.docVIP

安徽建筑大学 毕 业 设 计 (论 文) 专 业 电气工程及其自动化 班 级 学生姓名 学 号 课 题 石灰窑除尘系统的设计 指导教师 2015年 6月 4日 安徽建筑大学 摘要 本文主要阐述了PLC设计的可行性，并进行了具体的实施方案。由于PLC电气控制系统与继电器--接触器电气控制系统相比，具有结构简单，编程方便，调试周期短，可靠性高，抗干扰能力强，故障率低，对工作环境要求低等一系列优点。 本课题根据石灰窑生产工艺的要求，对整条生产线的电气控制进行设计，以实现生产过程的现代化。本次设计主要运用到了除尘系统的烟气抽风机、除尘螺旋输送机、除尘斗式提升机三个电机的电控系统的硬件电路设计，冷风流量阀门控制PLC原理图。还运用到了除尘系统电机控制软件设计，关于S7-200的PLC的硬件系统和编程软件的简介。 关键词：PLC设计；除尘系统；电路设计；石灰窑 Abstract The article mainly elaborated the PLC feasibility of design, and the specific implementation plan. Because of electric control system PLC there are lots of advantages which include design, install,connect the line and adjust to try workload small, the period of research and manufacture is short, reliability is high, the ability of Anti-interference is very strong, the rate of break down is low, the demand of work environment is low, maintenance convenience a series of advantage etc. According to the requirements of the production process of lime kiln, the electrical control of the whole production line is designed to realize the modernization of the production process.. This design mainly uses the dust removal system of the fume exhaust fan, dust spiral conveyor, dust bucket type lifting machine of three motor control system hardware circuit design, for the cold air flow valve control PLC schematic. The software design of the motor control software for the dust removal system is also applied to the hardware and software of the PLC S7-200. Keywords: PLC design; dust removal system; circuit design; lime kiln 目录 TOC \o 1-3 \h \z \u 5364 1、绪论 1 3315 1.1 引言 1 24231 1.2 石灰窑生产工艺流程 2 32552 1.3 本课题研究的内容 3 21692 2、石灰窑除尘系统的硬件设计 4 1767 2.1烟气抽风机的电控回路硬件设计 4 3872 2.1.1 软启动原理介绍 4 13301 2.1.2 烟气抽风机的硬件设计 4 32742 2.2 除尘螺旋输送机的电控回路硬件设计