Preparation of methodical basis for real-time digital models for relay-protection建立实时数字模型的方法学基础.pdfVIP

ISSN Russian Electrical Engineering, 2011, Vol. 82, No. 7, pp. 377–380. © Allerton Press, Inc., 2011. Original Russian Text © G.S. Nudel’man, O.A. Onisova, A.A. Navolochny i, 2011, published in Elektrotekhnika, 2011, No. 7, pp. 40–44. Preparation of Methodical Basis for RealTime Digital Models for RelayProtection Purposes G. S. Nudel’man, O. A. Onisova, and A. A. Navolochnyi Received June 29, 2011 Abstract—Peculiarities of the realtime digitalmodeling complex that allow them to be used to perform a complete test cycle of relayprotection systems under conditions maximally close to a real service environ ment are considered. The structure of methodical base necessary for effectively carrying out this testing is pro posed. Keywords: relay protection, realtime digitalmodeling complex, testing, methodical base, certification pro cedure. DOI: 10.3103/S1068371211070054 The modern development phase of the relay pro ing of RPA devices under conditions maximally close tection and automatics (RPA) is characterized by sub to those in real electricalpower systems. stantially complicated software. The presentday For this purpose, all leading power systems world industrial microprocessor terminals combine many wide employ Real Time Digital Simulator (RTDS) protective functions, automatics, and controlling. A software, made by RTDS Technologies Inc., Canada large number of RPA devices use programmable logic [2]. The RTDS complex enables one to perform a that allows one to change the operational algorithm, complete test cycle of an RPA system a based on digital which determines complicated, functionall