【精品文关于设计有关的外文文献翻译：利用LabVIEW开发光谱成像数据采集软件.pdfVIP

Computers and Electronics in Agriculture 84 (2012) 68–75 Contents lists available at SciVerse ScienceDirect Computers and Electronics in Agriculture journal homepage: /locate/compag Development of software for spectral imaging data acquisition using LabVIEW Weilin Wang a, Changying Li a,⇑, Ernest W. Tollner b, Glen C. Rains a a Biological and Agricultural Engineering, University of Georgia, Tifton, GA 31793, USA b Biological and Agricultural Engineering, University of Georgia, Athens, GA 30602, USA a r t i c l e i n f o a b s t r a c t Article history: Developing data acquisition software is a major challenge in integrating a spectral imaging system. This Received 2 June 2011 paper presents the design and implementation of a data acquisition program using LabVIEW for a liquid Received in revised form 31 January 2012 crystal tunable filter based spectral imaging system (900–1700 nm). The module-based program was Accepted 20 February 2012 designed in a three-tier structure. The image acquisition process, modelled by a finite state machine, was implemented in LabVIEW to control the spectral imaging system to collect hyperspectral or multi- spectral images. The collected spectral images were encoded in general format and could be further pro- Keywords: cessed by other common spectral image analysis tools. In addition, the program could be used to observe Hyperspectral imaging Software