非线性破坏准则下法向受力条形浅锚抗拔力上限计算方法-中南大学学报.pdf

40 5 () Vol.40 No.5 2009 10 Journal of Central South University (Science and Technology) Oct. 2009 ( 410075) c φ t t MATLAB M-C TU470 A 1672−7207(2009)05−1444−07 Calculating method of upper bound for ultimate pullout capacity of vertically loaded strip plate anchors based on nonlinear Mohr-Coulomb failure criterion ZHAO Lian-heng, LI Liang, YANG Xiao-li, DANG Han-cheng, ZOU Jin-feng (School of Civil and Architectural Engineering, Central South University, Changsha 410075, China) Abstract: Based on the upper bound limit analysis theorem, the associated flow rule and the nonlinear M-C failure criterion, the ultimate pull-out capacity (UPC) of vertically loaded strip plate anchors were studied by means of the kinematical approach of limit analysis theory. The procedures were as follows: the nonlinear shear strength parameters, i.e., internal friction angle φ and cohesive force c , were treated as variable parameters for the calculation schemes. The t t objective function of UPC was obtained by equating the work rate of extern