【精品文档】关于LabVIEW软件编程有关的外文文献翻译成品：利用LabVIEW软件开发新的数据采集软件（中英文双语对照）9.docxVIP

此文档是毕业设计外文翻译成品（ 含英文原文+中文翻译），无需调整复杂的格式！下载之后直接可用，方便快捷！本文价格不贵,也就几十块钱！一辈子也就一次的事！ 外文标题：USING LabVIEW SOFTWARE FOR DEVELOPMENT OF NEW DATA ACQUISITION SOFTWARE 外文作者：Marko REIBENSCHUH, Franc CUS, Uros ZUPERL 文献出处: machine design, Vol.4(2018) No.3, ISSN 1821-1259 pp. 157-160 (如觉得年份太老，可改为近2年，毕竟很多毕业生都这样做) 英文2531单词，15430字符(字符就是印刷符)，中文3900汉字。 USING LabVIEW SOFTWARE FOR DEVELOPMENT OF NEW DATA ACQUISITION SOFTWARE Abstract: LabVIEW enables programing and development of different interfaces for monitoring. Because of worldwide increasing demands for condition monitoring and demands to increase productivity, a new user interface for data acquisition is developed and applied to gather data and information during cutting. Other possibilities for implementing the method into production process are also researched. To monitor a high speed process, the use of high speed camera is inevitable. This paper presents preliminary development, tests and result. Key words: Monitoring, Milling, Data Acquisition, LabVIEW 1.INTRODUCTION Programs developed for monitoring are no longer written in whole by the developer. Programs as C, C#, C++, Lisp and many others are complex to write and correct. LabVIEW has the advantage that many of the coding is already grouped into blocks, which already have a certain function. In recent years there has been a minor setback in development of new acquisition techniques and software. Most authors use existing techniques and programs which they rewrite and implement methods from other scientific fields. Some author use intelligent methods to optimize, predict, gather information and data, others rely on hardware to measure and gather data. A decision was made to rewrite an existing system for measurements and gathering data with an additional system. In the field of machining were everything constantly in motion the options for data gathering and applying new techniques are endless. But still there are some restrictions coupled on the acquired values. These rest