应用于电气系统的可编程序控制器(英).docVIP

附件2：外文原文 Programmable Controller Designed for Electro-pneumatic Systems Summary this item is mainly the procedure which studies electricity system and in brief valid control current of air to launch machine to compatibly flow the appearance of system. It of the fulfillment foundation include according to the control procedure of particularly have of the current of air controller, automation design, current of air system and design according to the electronics of the tiny controller. 1. Brief introduction The automation which uses an electricity technique mainly constitutes to. from 3 part: Launch machine or motor, sensor or button, the form is zero partses such as the control of flower petal. Now, greatly part of system logic the controllers of the operation drive all procedure logic controller (PLC) replace. PLC sensor and switchs aring an importation to carry, but launch the direct control valve of machine is an exportation to carry and have an internal procedure to operate among them all circulate essential logic, imitate other devices like calculator, in fixed time machine etc., carry on a control to the whole movement appearance of system. Can according to need numerous time to establish and imitate thus of system, so all from PLC usage, this item contains vivid advantage. Therefore can save time, the danger of decrease error, in the meantime under the sistuation that use same material, it can be getting more precise. Many company that is on the market used the PLC of normal regulations and it can not only control with the current of air system, but also can use various electricity equipments. PLC wide range of application, can be apply in much industry to produce medium, even used for safety and automation of building in. Because of above various characteristic, the PLC provided a lot of resourceses in somely physically appliedly, even include not a resources of control the system and the electricity system was a kind of application like this.For the engineeri