工业冷冻用户培训课程约克.ppt

* 压缩机有常用的RWBII、RWF、RXF等；H为高压级、B为低压级。 * * * Perhaps the most important reason for using anti-friction bearings in a screw compressor is that they have less internal clearance than sleeve bearings. This allows tighter rotor to rotor positioning. Any gas compressed to high pressure in a screw will try to leak back to suction through any available leakage path. The most difficult leakage path to control is the path down the center directly between the two rotors. A 3 inch diameter journal bearing will require approximately 0.003 inch internal clearance in order to build an oil film. A cylindric