全尺寸单排翅管耦合换热的异步CFD模拟_白焰.pdfVIP

36 2 Vol.36 No.2 Jan. 20, 2016 480 2016 1 20 Proceedings of the CSEE ©2016 Chin.Soc.for Elec.Eng. DOI 10.13334/j.0258-8013.pcsee.2016.02.020 0258-8013 (2016) 02-0480-09 TK 11 CFD 1 1 2 3 (1 102206 2 100080 3 102200) Asynchronous CFD Simulation for Conjugate Heat Exchange of Full-size Single Row Finned Tube 1 1 2 3 BAI Yan , DENG Hui , LI Xinxin , ZHANG Dongming (1. School of Control and Computer Engineering, North China Electric Power University, Changping District, Beijing 102206, China; 2. China Power Complete Equipment CO.,LTD., Haidian District, Beijing 100080, China; 3. Beijing GDZS control technology CO., Changping District, Beijing 102200, China) ABSTRACT: The single-row flat wave finned tube is widely (computational fluid dynamicsCFD) applied as the unit tube by the direct air cooled condenser in power plants. Caused by the complicated body geometry in fin side, the vapour condensation involving phase transition, and the heat transfer from vapour zone to air zone conjugating on 282 CFD several interfaces, using computational fluid dynamics (CFD) CFD method to simulate the heat transfer in both the vapour channel CFD CFD and the cooling air channel simultaneously, many challenges are encountered. A mathematical model to simulate the condensation of water vapour was developed counting the interfacial shear stress, the heat balance conditions on the (CFD) in