汽车专业英语：第十六章.pptVIP

Fig16-18 Cut the ribs 返回 Fig16-19 Grind off the edges of the roof cuts 返回 Fig16-20 Apply the protective foil strips 返回 Fig16-21 Place the wind deflector in the holes 返回 Fig16-22 Attach the wind deflector 返回 Fig16-23 Drop the sunroof into the cutout 返回 Fig16-24 Remove the “A” pillar cap 返回 Fig16-25 Remove the two retaining screws 返回 Fig16-26 The motor can be sild 返回 Fig16-27 Put the motor fastening screws in 返回 Fig16-28 Push the frame sides on 返回 Fig16-29 Place the supports in position 返回 Fig16-30 Connect the operating switch 返回 Fig16-31 Fit the front trim cover 返回 Fig16-32 Guide the wire for